Mould parting agents for the steel and aluminium industry:
 

As a leading manufacturer of mould parting agents for the continuous casting of aluminium, we manufacture the following products:
 
                                                 

Viscosity
(appprox.)

Description

Exal 20 22 mm²/40°C

Mineral oil containing mould parting agent
Exal 45   32 mm²/40°C

Vegetable-based mould parting agent on
Especially for hot head moulds
for automatic and manual
lubrication, saws for aluminium ingots,
drawing and sliding agents for
the processing of rubber and steel.
Biodegradable.
Exal 55   100 mm²/40°C
Exal 65   220 mm²/40°C
Exal 70  320 mm²/40°C
Exal 75  460 mm²/40°C
Exal 80 680 mm²/40°C
Exal 90 1500 mm²/40°C
Exal 600 1200 mm²/40°C

Viscous mineral oil containing mould parting agent
 
Exal 510  150 mm²/40°C Thin mould parting agent
Exal 530 220 mm²/40°C Mould parting agent - standard quality
Exal 540 220 mm²/40°C Mould parting agent - superior quality
Exal 120   35 mm²/40°C Special mould parting agent for precision casting
 
Exal 845 45 mm²/40°C Further development of our mould parting agent EXAL 45, enhanced compatibility  with the environment, reduced consumption
Exal 875 ca. 460 mm²/40°C Further development of our mould parting agent EXAL 75, enhanced compatibility with the environment, reduced consumption
 
Exal 945 45 mm²/40°C Further development of our mould parting agent EXAL 845, enhanced compatibility  with the environment
 
Exal Grease LH 90  NGLI 00/0 Vegetable-based,
suitable as wire drawing agent
Exal Grease 101 NGLI 1 Biodegradable mould parting agent,
also suitable for the environmentally friendly  lubrication of roller bearings and sliding frictions
Exal Grease 102 NGLI 2
Exal Grease 103 NGLI 3
EXAL Grease 2000 NGLI 00/0 Still in the test stage
 
Exal 2000 1500 mm²/40°C Still in the test stage
 
Continuous casting of steel:
Ferrex 20 DIN ISO-VG   36 Vegetable-based
mould parting agent
for continuous casting of steel
Ferrex 65 DIN ISO-VG 220
Ferrex 90 DIN ISO-VG 680
 

 In most cases, the basic oils are produced from vegetable raw material. Almost all EXAL mould parting agents are biodegradable.
 

 Our company is also a producer and distributor of liquid mould parting agents for the continuous casting of steel. The parting agents can be adapted to suit the specific requirements of your plants. Ferrex 20 is supplied as standard product. Furthermore, we offer mineral oil based mould parting agents.

 

On request, we will be pleased to send you more information on these and other products.
Please make use of the prepared contact page.
 

Mould parting agents are being used by the manufacturers and plant engineers listed below:

 

Hydro Aluminium Deutschland GmbH 
Georg-von-Boeselager-Str. 25
53117 Bonn, Germany
Phone:              (+49) 228-5522438
Fax:                 (+49) 228-5521991
E-Mail:              manfred.langen@hydro.com
Internet:             

  Mould VAW AIRSOL VEIL® 
 
Hertwich Engineering
Weinbergerstrasse 6
5280 Braunau, Austria
Phone:             (+43) 7722-806-0
Fax:                 (+43) 7722-806-22
E-Mail:              info@hertwich.com
Internet:            www.hertwich.com

  Round bar mould Hertwich Engeneering
Maerz Gautschi
 Industrial Furnaces
Konstanzer Str. 37
8274 Tägerwilen, Switzerland
Phone:   (+41) 71-666 66 66
Fax:       (+41) 71-666 66 77
E-Mail:              aluminium@maerz-gautschi.ch
Internet:             www.maerz-gautschi.ch 

 

 If you are in Australia or Asia, please address your enquiry to our agent:
 

o.d.t. Engineering Pty Ltd
521 Hammond Road
Dandenong, Vic 3175, Australia
Phone:           (+613) 9706-4135
Fax:               (+613) 9706-4152
e-mail:              odteng@odt.com.au
Internet:            www.odt.com.au
 

return
 
 
Senden Sie E-Mail mit Fragen oder Kommentaren zu dieser Web-Site an: Poggel.Volker@pml-netdesign.de
Diese Seite wurde erstellt durch PML-Netdesign GmbH
Copyright © 2000 PML-Netdesign GmbH
Zuletzt geändert am: 20. März 2002